Our Contacts
By continuing to use our website, you agree to the use of cookies in accordance with our Privacy Policy.
Insol-Vision
comprehensive video surveillance solution built on 10BASE-T1L (IEEE 802.3cg) Single Pair Ethernet (SPE) technology, consisting of an Insol-Switsh unmanaged switch and 4K video cameras with a built-in Insol-MC33 media converter.
The cable is not included and must be ordered separately!
Price excluding VAT & Delivery
Price on request
The cable is not included and must be ordered separately!
Price excluding VAT & Delivery
Price on request
SPE cameras with PoDL support based on 10BASE-T1L
Ethernet ports
Power
The comprehensive solution provides galvanically isolated power to each camera and transmits high-definition video over a single twisted pair without additional power supplies or repeaters for up to 1,500 m, and for an additional 1,500 m with each Insol-MC32 repeater.
Insol-Vision is a comprehensive video surveillance solution built on 10BASE-T1L (IEEE 802.3cg) Single Pair Ethernet (SPE) technology. The equipment kit provides galvanically isolated power to each camera and transmits high-definition video over a single twisted pair without additional power supplies or repeaters for up to 1,500 m, and for an additional 1,500 m with each Insol-MC32 repeater.10BASE-T1L (IEEE 802.3cg).
Single Pair Ethernet (SPE) enables data transmission at speeds up to 10 Mbps over distances up to 1,500 m via a single twisted pair.
Power over Data Line (PoDL) (IEEE 802.3bu) delivers up to 15 W of power to the connected device over the same single pair, eliminating the need for a separate power cable.
The equipment for this comprehensive solution (excluding the cameras) was developed and designed for industrial facilities with stringent requirements for reliability, range, and ease of installation: tank farms, oilfield sites, long pipeline routes, grain elevators, and production workshops.
Insol-Vision solution components:
Single Pair Ethernet (SPE) enables data transmission at speeds up to 10 Mbps over distances up to 1,500 m via a single twisted pair.
Power over Data Line (PoDL) (IEEE 802.3bu) delivers up to 15 W of power to the connected device over the same single pair, eliminating the need for a separate power cable.
The equipment for this comprehensive solution (excluding the cameras) was developed and designed for industrial facilities with stringent requirements for reliability, range, and ease of installation: tank farms, oilfield sites, long pipeline routes, grain elevators, and production workshops.
Insol-Vision solution components:
- Insol-Switch an industrial unmanaged SPE switch featuring 3, 6, or 10 10BASE-T1L PoDL ports, alongside SFP and Ethernet ports for connection to existing infrastructure;
- Upgraded High-Definition IP Cameras (HiWatch, Hikvision or other ONVIF-compliant equivalents) – standard IP cameras with a built-in MC33 media converter board and a dedicated external connector (replacing standard RJ-45 ports) for adaptation to the 10BASE-T1L PoDL interface.
Key Benefits of Insol-Vision:
> All-in-One Cable Solution
A single twisted pair cable with a cross-section of 0.75...1.0 mm² replaces four conductors (UTP Cat5e) for data and a 24/12 V power cable. Cabling costs are reduced by 2 to 3 times, while the number of junction boxes, terminal blocks, and potential points of failure decreases proportionally.
> Up to 1,500 m without Repeaters
Enjoy a 1,500 m range in point-to-point mode, compared to just 100 m for standard PoE (IEEE 802.3af/at) and 300 m for Long Range PoE. Facilities with distances of 500 to 1,500 m between the control room and the cameras eliminate the need for intermediate power enclosures, active extenders, or fiber optic converters.
> Legacy Equipment Compatibility
The MC33 board fits seamlessly inside standard HiWatch and Hikvision IP camera housings with diameters starting from 55 mm, delivering cameras in a ready-to-use SPE configuration. Camera firmware and settings remain completely unchanged. Full compliance with ONVIF and RTSP protocols ensures seamless integration with any Video Management System (VMS) and Network Video Recorder (NVR).
> High Reliability
The Insol-Switch features 24 VDC redundant power input, while the 10BASE-T1L PoDL ports are fully galvanically isolated.
> All-in-One Cable Solution
A single twisted pair cable with a cross-section of 0.75...1.0 mm² replaces four conductors (UTP Cat5e) for data and a 24/12 V power cable. Cabling costs are reduced by 2 to 3 times, while the number of junction boxes, terminal blocks, and potential points of failure decreases proportionally.
> Up to 1,500 m without Repeaters
Enjoy a 1,500 m range in point-to-point mode, compared to just 100 m for standard PoE (IEEE 802.3af/at) and 300 m for Long Range PoE. Facilities with distances of 500 to 1,500 m between the control room and the cameras eliminate the need for intermediate power enclosures, active extenders, or fiber optic converters.
> Legacy Equipment Compatibility
The MC33 board fits seamlessly inside standard HiWatch and Hikvision IP camera housings with diameters starting from 55 mm, delivering cameras in a ready-to-use SPE configuration. Camera firmware and settings remain completely unchanged. Full compliance with ONVIF and RTSP protocols ensures seamless integration with any Video Management System (VMS) and Network Video Recorder (NVR).
> High Reliability
The Insol-Switch features 24 VDC redundant power input, while the 10BASE-T1L PoDL ports are fully galvanically isolated.
Camera Connection
Switch Connection
Additional Info
Still have questions? Want to clarify the details?
Drop us a line, we will be glad to answer you.
Drop us a line, we will be glad to answer you.